Part number 65102 11039 102 - Washer Keyway with NSN 5310009450457 under 5310 Nuts and Washers is now available and ready for immediate shipping. Sourced from Sikorsky Aircraft Corporation, you can easily order part number 65102 11039 102 at a competitive price. To get a quick quote for this part, just fill out the form.
Please make sure to fill out the form below as carefully and completely as possible. Pay attention to the asterisk (*) marked fields, as your response will determine the majority of your quote. A sales representative will contact you within 15 of receiving your request.
Note : We will not share your information to any third parties.
Aerospace Aces, owned and operated by ASAP Semiconductor, is an AS9120B, ISO 9001:2015, and FAA AC 0056B accredited distributor of Sikorsky Aircraft Corporation obsolete and hard-to-find parts. We are the only independent distributor with a No China Sourcing Pledge, so you can trust us to help you get the highest quality parts and NSNs.
The NSN, or National Stock Number, is a 13-digit serial number assigned to items of the federal supply chain by the Defense Logistics Agency (DLA) and used by all members of the North Atlantic Treaty Organization (NATO) and the United States Department of Defense. If you have any questions about NSN 5310009450457, or would like to expedite your quote, please feel free to call us at our toll-free number, +1-714-705-4780, or email us at firstname.lastname@example.org.
|65102 11039 102||6||2||3|
|AAUB||HOLE DIAMETER||4.535 INCHES MINIMUM AND 4.545 INCHES MAXIMUM|
|ABKV||OUTSIDE DIAMETER||5.625 INCHES NOMINAL|
|ABKZ||EXTERNAL KEYWAY LENGTH||0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM|
|ABLL||EXTERNAL KEYWAY WIDTH||0.500 INCHES NOMINAL|
|ABPX||MATERIAL THICKNESS||0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM|
|CQBC||MINIMUM TENSILE STRENGTH||150000 POUNDS PER SQUARE INCH|
|CQFM||HARDNESS RATING||34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM|
|CSYM||SURFACE FINISH||90.0 MICROINCHES ALL SURFACES|
|FEAT||SPECIAL FEATURES||CENTER HOLE IS ROUND WITH FLATS 4.390 IN. ACROSS FLATS WITH TWO TAPPED HOLES 0.190-32 NF-2B THD|
|MATT||III MATERIAL||STEEL OVERALL|
|MDCL||MATERIAL DOCUMENT AND CLASSIFICATION||MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL|
|651 000 023 2||651 000 023 3||651-00018A0-1012K||651-00018A0-142G|
We Hope You'll Choose Us as Your Parts Distributor In the Future. Don’t forget That We offer Competitive Quotes and Same-Day Shipping On Most of Our Inventory.Request for Quote